Collet Chuck - ER Collet Chuck Series
Home>Products>Collet Series>SYIC-04730
NT／ER Collet Holder
Model : SYIC-04730
DIN 6499
Feature :
- It is made of from SCM - 21 steel and hardened with high rigidity.
- In the end of body has a plastic ring, to protect the spindle from damage.
- Holder can purchase separately, each holder has a clamping nut attached, but without spanner.
- Please specify DRAW BAR's size when purchase holder.
| TYPE | d3 | l3 | l4 | l5 | t1 |
| ER8-M | 8 | 9 | 13 | 5 | M10x0.75P |
| ER11-A | 11 | 10 | 17 | 6.6 | M14x0.75P |
| ER16-A | 16 | 13 | 22 | 10.6 | M22x1.5P |
| ER20-A | 20 | 13.5 | 26.5 | 11.5 | M25x1.5P |
| ER25 | 25 | 14 | 29 | 12 | M32x1.5P |
| ER32 | 32 | 16 | 34 | 13 | M40x1.5P |
| ER40 | 40 | 17 | 38 | 15 | M50x1.5P |
| ER50 | 50 | 20 | 49 | 23 | M64x2.0P |
| MODEL NO | TYPE DIN2080 x ER x l1 |
L | l2 | D | d1 | t2 | T DRAW BAR |
WEIGHT (KGS) |
| SYIC-04732 | NT30xER16A-43 | 111.4 | 8 | 49 | 28 | M10x1.5P | M12 x 1.75P or 1/2" W12 |
0.50 |
| SYIC-04733 | NT30xER20A-45 | 113.4 | 34 | M12x1.75P | 0.60 | |||
| SYIC-04734 | NT30xER25-55 | 123.4 | 42 | M16x2.0P | 0.65 | |||
| SYIC-04735 | NT30xER32-60 | 128.4 | 50 | M16x2.0P | 0.80 | |||
| SYIC-04736 | NT30xER40-75 | 143.4 | 63 | M16x2.0P | 0.90 | |||
| SYIC-04738 | NT40xER16A-45 | 138.4 | 10 | 63 | 28 | M10x1.5P | M16 x 2.0P or 5/8" W11 |
0.95 |
| SYIC-04740 | NT40xER20A-45 | 138.4 | 34 | M12x1.75P | 1.20 | |||
| SYIC-04742 | NT40xER25-55 | 148.4 | 42 | M16x2.0P | 1.25 | |||
| SYIC-04743 | NT40xER32-60 | 153.4 | 50 | M16x2.0P | 1.30 | |||
| SYIC-04745 | NT40xER40-70 | 163.4 | 63 | M20x2.0P | 1.35 | |||
| SYIC-04746 | NT40xER50-80 | 173.4 | 78 | M24x2.0P | 2.00 | |||
| SYIC-04748 | NT50xER32-75 | 201.8 | 12 | 97.5 | 50 | M16x2.0P | M24 x 3.0P or 1" W8 |
3.20 |
| SYIC-04749 | NT50xER40-80 | 206.8 | 63 | M20x2.0P | 3.40 | |||
| SYIC-04750 | NT50xER50-80 | 206.8 | 78 | M24x2.0P | 3.70 |
Relative Products :